Service

1. Product introduction

The characteristics of fly ash mixture: a wide range of precipitated metals and chelating metals, especially the chelation of heavy metals; good water-soluble dispersion, high reagent utilization, stable distribution of fly-back treatment performance; it can be properly prepared according to the specific waste incineration process and heavy metal content, and can be combined with a small amount of cement and other inorganic materials to further increase stability and strength. The performance of the treated fly ash is stable and reliable and can meet the standard of sanitary landfill.

Fly ash mixture can be widely used in the stabilization of municipal solid waste incineration fly ash and solid waste treatment system of heavy metals, river sludge, municipal sludge, industrial sludge containing heavy metals, slag stabilization and other fields.

2. Performance index

3. Usage

1、According to the quality of fly ash, 25% of the water is taken and 30% of the water is added into the mixture according to the technological requirements.

2、The addition amount of the agent is 2% of the quality of fly ash. If cement is added, the addition amount of the agent can be increased accordingly, and the specific addition amount can be determined according to the on-site small-scale test.

3、The fly ash stabilization treatment system, equipment and control process need to ask the technicians of the relevant equipment companies.。

4. Packaging and storage and transportation

(1)This product is packed in plastic buckets, 25Kg/ buckets, 1t/ buckets or determined according to customer needs.

(2)This product is stored in a dark, ventilated warehouse, away from fire and high temperature, and the storage temperature should not exceed 30 ℃.

(3)Separate from flammable, combustible, reducing agents, acids, alkalis and other substances, do not mix storage.

(4)The storage area shall be provided with emergency leakage handling equipment and suitable reception materials.

(5)) this product is not suitable for long-term storage. It is best to use it within three months after receiving the product.

5. Safety and protection

(1)To avoid inhalation and ingestion, operators must wear protective glasses, acid-and-alkali gloves, protective mouth masks and work caps, and wear protective clothing against acid and alkali if necessary.  

(2)Do not eat or drink in the course of work, pay attention to ventilation or local ventilation, and wash hands with soap and water after work.

(3)Prevent collision during loading and unloading, pay attention to sealing, and prevent packaging and container damage.

(4)Barbaric loading and unloading should be prohibited in the process of loading and unloading to ensure that the container does not leak, collapse, fall or damage, so as to prevent the solution from splashing and injuring during the loading and unloading process.